Data Dictionary
>
FPSADMIN Views
> FPSADMIN.WIP_WAFER_HIST_LOOP
View FPSBASE.CTM_APD_WEEK_HIST
This view summarizes data from WIP_END_SHIFT_HIST for the previous week. The logic here is similar to the logic in CTM_REF_FINAL and this table feeds that view so any changes will likely need to be made to both views. This view has only the raw data for the specific grouping only without filling in the best available data..
|
Column |
Comment |
|---|---|
|
START_WEEK |
Work weeks must be 7 days in duration and the start of the work week must be the start of one of the work days. (* inherited from FPSINPUT.CAL_WORK_WEEKS) |
|
FACILITY |
Facility is included in almost every join in the DWH so this represents a definitive split. A route must have all steps on tools in the same facility. A tool must process all lots in the same facility. If your site has multiple buildings where lots run on routes using tools in multiple buildings then everything should be one facility. For example, multiple Fab buildings. But if your site has independent facilities like Fab and Test and Assembly where lot may progress from one to the next but on different routes then these should be different facilities. Since this column is in virtually every table it is critical that the value here is exactly matches what is in the MES if the MES has facility. Use facility_display for the display friendly name displayed in applications. See site_name comment for client/site/facility example. (* inherited from FPSINPUT.GEN_FACILITIES) |
|
PRD |
Prd determines the route which is used to process the lot in the facility and what tools, recipes, durables, etc. can be used at each step. Prd also determines the next facility for the lot when it finishes its route. For detailed information on prd vs. planprd see table comments in RTG_PLANPRDS. (* inherited from FPSINPUT.RTG_PRDS) |
|
PLANPRD |
Planning product used for all planning purposes. All lots with the same planprd are interchangeable to ship to the customer regardless of their prd, route, technology, wafer size, etc. For detailed information on prd vs. planprd see table comments in RTG_PLANPRDS. (* inherited from FPSINPUT.RTG_PLANPRDS) |
|
ROUTE |
Route that has threading requirements (* inherited from FPSINPUT.RTG_STEP_THREADING) |
|
STEP |
A single processing step within a route representing a single tool visit. Step is often a very complex string and should rarely be displayed. Instead we should use process_display. (* inherited from FPSINPUT.RTG_ROUTE_STEPS) |
|
BANK |
Lots which are not on a route are considered in a bank and the bank name indicates why the lot is off route. Bank must be NA for lots which are on a route. Our standard filter for active lots is bank = NA. (* inherited from FPSINPUT.RTG_BANKS) |
|
PRTY_CTM_GROUP |
This is one of the primary keys of our CTM tables. We use this group rather than the priority because we often have several different priorities which are close and are expected to have the same cycle time. (* inherited from FPSINPUT.WIP_PRIORITIES) |
|
LOT_GROUP |
Lot_group is a grouping of lot_family and is the highest grouping in the lot type hierarchy. There should be only a few values for lot_group, i.e. Prod, Dev, TW. We group WIP and moves by lot_group on the dashboard and we group cycle time calculations by lot_group so this is an important field. (* inherited from FPSINPUT.WIP_LOT_GROUPS) |
|
IS_NONSTD |
Our column to indicate non-standard processing at the step. For example, an experiment or a chain that is only active at a particular step or set of steps and then goes back to being normal for the route. If an experiment is severe enough that it affects the final product and has to be planned separately then it will be its own prd or planprd. (* inherited from FPSBASE.WIP_LOT_HIST) |
|
PROCESS_FAMILY |
See https://help.inficonims.com/display/DW/Guide+to+Process+Families. (* inherited from FPSINPUT.RTG_PROCESS_FAMILIES) |
|
NUM_JOBS_COMP |
|
|
QTY_COMP |
|
|
NUM_LOTS_ISKIP |
|
|
QTY_ISKIP |
|
|
NUM_LOTS_DSKIP |
|
|
QTY_DSKIP |
|
|
NUM_LOTS_RT_OR_PRD |
|
|
QTY_RT_OR_PRD |
|
|
NUM_LOTS_DTONLY |
|
|
QTY_DTONLY |
|
|
NUM_LOTS_ENDWIP |
|
|
QTY_ENDWIP |
|
|
TOTAL_HOLD_SEC_COMP |
|
|
TOTAL_BLOCK_SEC_COMP |
|
|
TOTAL_WAIT_SEC_COMP |
|
|
TOTAL_DISP_SEC_COMP |
|
|
TOTAL_PROC_SEC_COMP |
|
|
TOTAL_ENDED_SEC_COMP |
|
|
TOTAL_STEP_SEC_ISKIP |
|
|
TOTAL_HOLD_SEC_DSKIP |
|
|
TOTAL_WAIT_SEC_DSKIP |
|
|
TOTAL_HOLD_SEC_RT_OR_PRD |
|
|
TOTAL_WAIT_SEC_RT_OR_PRD |
|
|
TOTAL_HOLD_SEC_DTONLY |
|
|
TOTAL_WAIT_SEC_DTONLY |
|
|
TOTAL_STEP_SEC |
Total number of unit-seconds accumulated by lots on hold at this step during the period including lots which moved out during the period and lots which remain at the end of the period. For example, if a 25 wafer lot is on hold at the step for 2 hours then it accumulates 25 wafers * 7200 seconds = 180000 wafer-seconds of hold time. (* inherited from FPSBASE.WIP_END_SHIFT_HIST) |
|
TCT_SEC |
Theoretical cycle time in seconds (* inherited from FPSBASE.WIP_LOT_HIST) |
|
PRTY_CTM_FACTOR |
Factor to multiply cycle time for this priority group compared to other groups if not known. For example, if this factor is 1.5 and we know the CTM is 6 hours for another priority group whose factor is 1.0 then we would estimate it to be 9 hours for this group. (* inherited from FPSINPUT.WIP_PRTY_CTM_GROUPS) |
|
STEP_SEC_MED_NOT_ISKIP |
|
|
NUM_LOTS_AT_LEAST_ONE_HOLD |
|
|
QTY_AT_LEAST_ONE_HOLD |
|
|
AT_LEAST_ONE_HOLD_SEC_AVG |
|
|
AT_LEAST_ONE_HOLD_SEC_MED |
|
|
WHY_NONSTD |