FPSAPP.DASH_P_H_WORK_DAY_TOOL_COMPS

WORK_DAY

START_WORK_DAY

Work days must be 24 hours in length and the start of the work day must be the start of one of the shifts. Contrast this to plan day which is independent of shift. (* inherited from FPSINPUT.CAL_WORK_DAYS)

END_WORK_DAY

It is critical that this field equal the start_work_day of the next work day. (* inherited from FPSINPUT.CAL_WORK_DAYS)

FACILITY

Facility is included in almost every join in the DWH so this represents a definitive split. A route must have all steps on tools in the same facility. A tool must process all lots in the same facility. If your site has multiple buildings where lots run on routes using tools in multiple buildings then everything should be one facility. For example, multiple Fab buildings. But if your site has independent facilities like Fab and Test and Assembly where lot may progress from one to the next but on different routes then these should be different facilities. Since this column is in virtually every table it is critical that the value here is exactly matches what is in the MES if the MES has facility. Use facility_display for the display friendly name displayed in applications. See site_name comment for client/site/facility example. (* inherited from FPSINPUT.GEN_FACILITIES)

TOOL

Tool is generally just the main tool. The exception is when different entities on the tool run completely independently and it is physically impossible to run wafers of the same lot across multiple entities. In this exception case, we may want to assign the entities to different eqp_types and therefore we should define each entity as a tool. Please note that when we do this there is no indication whatsoever that these different entities are on the same tool. (* inherited from FPSINPUT.EQP_TOOLS)

ROUTE

Route that has threading requirements (* inherited from FPSINPUT.RTG_STEP_THREADING)

STEP

A single processing step within a route representing a single tool visit. Step is often a very complex string and should rarely be displayed. Instead we should use process_display. (* inherited from FPSINPUT.RTG_ROUTE_STEPS)

LOT_TYPE

Lot_type is the base of the hierarchy that determines lot_family then lot_group. Ideally lot_type will come straight from the MES with little modification. (* inherited from FPSINPUT.WIP_LOT_TYPES)

LOT_GROUP

Lot_group is a grouping of lot_family and is the highest grouping in the lot type hierarchy. There should be only a few values for lot_group, i.e. Prod, Dev, TW. We group WIP and moves by lot_group on the dashboard and we group cycle time calculations by lot_group so this is an important field. (* inherited from FPSINPUT.WIP_LOT_GROUPS)

IS_TW

Our standard filter to exclude test wafers is is_tw = N but what we really mean with this filter is to exclude any lots that do not add value for the facility. Lots which add value including sellable, development, and engineering and these lot groups should have is_tw set to N. Lots which do not add value are commonly grouped together and named "test wafers" which is why this flag is named is_tw. These include true test wafers like monitors and quals and dummies but also could include virtual lots used for training or testing, bare wafers, or really anything else including in the MES as a lot which does not add value. All of these lot groups should have is_tw set to Y. You could argue that the is_tw field might be more accurately named is_value or is_valuable or is_prod_eng_dev but is_tw is generally clear to most people. Plus it has the advantage that it is short which is nice given how frequently we use the is_tw = N filter. (* inherited from FPSINPUT.WIP_LOT_GROUPS)

PLAN_PRIORITY

Permanent priority of the lot set in the MES generally by planning. (* inherited from FPSINPUT.WIP_EVENT_HIST)

IS_NONSTD

Our column to indicate non-standard processing at the step. For example, an experiment or a chain that is only active at a particular step or set of steps and then goes back to being normal for the route. If an experiment is severe enough that it affects the final product and has to be planned separately then it will be its own prd or planprd. (* inherited from FPSBASE.WIP_LOT_HIST)

IS_REWORK_STEP

EQP_PROCESS_FAMILY

EQP_MODULE

EQP_MODULE is the module responsible for operating the tool. See comments on the module column in GEN_MODULES for info on this column and how it relates to eqp_module and mnt_module. (* inherited from FPSBASE.EQP_TOOLS_PLUS)

MNT_FAMILY

MNT_FAMILY is assigned to each EQP_TYPE. Tools in the same MNT_FAMILY are similar and share the same maintenance schedule. (* inherited from FPSINPUT.EQP_MNT_FAMILIES)

PROCESS

Process defines what occurs at a step. Different steps can share the same process if they are identical. Process should normally determine allowed tools and recipe although it can be overridden by step, route, prd, lot, and experiment for exceptions. Each process is dynamically assigned to one or more eqp_type-process_family combinations with use_pct. One process_family is determined to be primary. If grouping is done correctly, a process should only be one eqp_group with no crossover. (* inherited from FPSINPUT.RTG_PROCESSES)

PROCESS_SUBFAMILY

Route step family is used for the Dashboard to separate processes in a process family based on shared but limited assignments. It is also the base for GP subfamily. (* inherited from FPSBASE.RTG_ROUTE_STEPS_PLUS)

PROCESS_FAMILY

See https://help.inficonims.com/display/DW/Guide+to+Process+Families. (* inherited from FPSINPUT.RTG_PROCESS_FAMILIES)

PROCESS_MODULE

WIP_MODULE is used to credit moves and set goals. See comments on the module column in GEN_MODULES for info on this column and how it relates to eqp_module and mnt_module. (* inherited from FPSBASE.RTG_ROUTE_STEPS_PLUS)

IS_IGNORE_WIP

This flag is in both RTG_OPERATION_FAMILIES and RTG_PROCESSES. If the value is Y for either the operation family or the process then we do not count WIP at the route-step towards the total for the facility. Typically this is set for staging operations. (* inherited from FPSINPUT.RTG_OPERATION_FAMILIES)

IS_IGNORE_MOVES

This flag is in both RTG_OPERATION_FAMILIES and RTG_PROCESSES. If the value is Y for the operation family then we do not count moves from those operations as oper moves. If the value is Y for either the operation family or the process then we do not count moves from the route-step as completes even if our normal logic suggests that it should be a complete. This logic can cause confusion so here are a few important notes. 1) Dashboard does not read the is_ignore_moves flag therefore we must set move_type to DSKIP rather than COMP and we must set is_oper_move to N in order to ignore the move. 2) This flag is often used for staging steps but it is independent of the is_staging_step flag so if you want to ignore staging steps then you need to set these flags appropriately. 3) The flag in RTG_PROCESSES does not directly affect the oper moves but it does affect it indirectly if the is_comp_rqd_for_oper_move is set to Y. In that case, if the only move during the operation is for a process which is ignored then we do not have a complete during the operation and therefore will not count the move from the operation as an oper move since a complete is required. (* inherited from FPSINPUT.RTG_OPERATION_FAMILIES)

OPERATION

Operation is usually the primary level of routing in the MES and the level where the facility typically reports moves. FPS only allows one tool per step so our step is a lower level of routing than operation although both may be the same if the MES only allows one tool per operation. Note that because operation can include multiple steps and therefore multiple process families that we cannot have any association to equipment by operation. (* inherited from FPSINPUT.RTG_OPERATIONS)

OPERATION_FAMILY

Grouping of route-step that is completely dependent on routing information from MES. The primary use of this field is for filtering on Operations Dashboard. Unfortunately for our database structure and naming convention, this field no longer has any link to operation. This is because operation is used primarily for Oper Moves and it is normal for steps in an operation to belong to multiple MES routing groups. For example, a sink step and a furnace step and a measurement step are in the same operation but each step belongs to the appropriate sink/furnace/measurement MES routing groups which we store in operation family. Since Dashboard already uses both operation and operation_family extensively and independently, we decided not to rename either column but simply remove the link. Please note that operation family is similar to process family and in fact they are often the same. The key differences are that operation family has nothing to do with equipment and that comes straight from ETL with no complex logic. Process family is the link between routing and equipment for the Operations Dashboard and therefore has complex logic. (* inherited from FPSINPUT.RTG_OPERATION_FAMILIES)

LINE_SECTION

Large grouping of the line, e.g. FEOL, BEOL, Cu, etc. There should be only a handful of values for the entire facility - or if the facility only has one section then we can leave this column blank. (* inherited from FPSINPUT.RTG_LINE_SECTIONS)

FACILITY_SEGMENT

Facility segment is the parent of common step and is used as the highest level grouping when we show WIP for a route group or the entire facility where we cannot use route segment. We would prefer somewhere between 8 and 20 facility segments. Typically we will have to define these (as opposed to route_segment which we will typically come from the MES). There is no RTG_FACILITY_SEGMENTS table because sorting of facility segments is determined by common_step_sort. A trigger on RTG_COMMON_STEPS ensures that facility segments are contiguous when the entire facility is sorted by common step. (* inherited from FPSINPUT.RTG_COMMON_STEPS)

MAIN_ROUTE

Primary route used by the prd. Excludes rework and alternate routing. We allow this column to be null in WIP_LOTS_VERIFY because we may not be certain what the main route is when we fix for missed events. In that event we trust the WIP_EVENT_HIST triggers has loaded the correct information into WIP_EVENTS_CURR_STEP. (* inherited from FPSINPUT.WIP_EVENT_HIST)

MAIN_ROUTE_FAMILY

Route family of the main route for the prd of the lot. (* inherited from FPSINPUT.WIP_OVR_OPER_MOVES_HIST)

MAIN_ROUTE_GROUP

Route group of main route. Often referred to as technology. (* inherited from FPSBASE.WIP_FLUSH)

CUSTOMER

Customer who will accept shipment of the lot. Currently this only used for grouping and filtering but in the future we might want to allow a customer to view a Dashboard only including their products. (* inherited from FPSINPUT.GEN_CUSTOMERS)

WAFER_SIZE

If the facility only has one wafer size then this column should be null in both RTG_PRDS and EQP_TYPES. If the facility has more than one wafer size then a value of null in EQP_TYPES means that those tools can run all wafer sizes. See column IS_ANY_WAFER_SIZE for details. (* inherited from FPSINPUT.GEN_WAFER_SIZES)

QTY_COMP

NUM_JOBS_COMP

NUM_LOTS_COMP