FPSBASE.DASH_P_CTM_SUMMARY

FACILITY

Facility is included in almost every join in the DWH so this represents a definitive split. A route must have all steps on tools in the same facility. A tool must process all lots in the same facility. If your site has multiple buildings where lots run on routes using tools in multiple buildings then everything should be one facility. For example, multiple Fab buildings. But if your site has independent facilities like Fab and Test and Assembly where lot may progress from one to the next but on different routes then these should be different facilities. Since this column is in virtually every table it is critical that the value here is exactly matches what is in the MES if the MES has facility. Use facility_display for the display friendly name displayed in applications. See site_name comment for client/site/facility example. (* inherited from FPSINPUT.GEN_FACILITIES)

PRD

Prd determines the route which is used to process the lot in the facility and what tools, recipes, durables, etc. can be used at each step. Prd also determines the next facility for the lot when it finishes its route. For detailed information on prd vs. planprd see table comments in RTG_PLANPRDS. (* inherited from FPSINPUT.RTG_PRDS)

PLANPRD

Planning product used for all planning purposes. All lots with the same planprd are interchangeable to ship to the customer regardless of their prd, route, technology, wafer size, etc. For detailed information on prd vs. planprd see table comments in RTG_PLANPRDS. (* inherited from FPSINPUT.RTG_PLANPRDS)

ROUTE

Route that has threading requirements (* inherited from FPSINPUT.RTG_STEP_THREADING)

STEP

A single processing step within a route representing a single tool visit. Step is often a very complex string and should rarely be displayed. Instead we should use process_display. (* inherited from FPSINPUT.RTG_ROUTE_STEPS)

BANK

Lots which are not on a route are considered in a bank and the bank name indicates why the lot is off route. Bank must be NA for lots which are on a route. Our standard filter for active lots is bank = NA. (* inherited from FPSINPUT.RTG_BANKS)

PRTY_CTM_GROUP

This is one of the primary keys of our CTM tables. We use this group rather than the priority because we often have several different priorities which are close and are expected to have the same cycle time. (* inherited from FPSINPUT.WIP_PRIORITIES)

LOT_GROUP

Lot_group is a grouping of lot_family and is the highest grouping in the lot type hierarchy. There should be only a few values for lot_group, i.e. Prod, Dev, TW. We group WIP and moves by lot_group on the dashboard and we group cycle time calculations by lot_group so this is an important field. (* inherited from FPSINPUT.WIP_LOT_GROUPS)

IS_NONSTD

Our column to indicate non-standard processing at the step. For example, an experiment or a chain that is only active at a particular step or set of steps and then goes back to being normal for the route. If an experiment is severe enough that it affects the final product and has to be planned separately then it will be its own prd or planprd. (* inherited from FPSBASE.WIP_LOT_HIST)

SEQ_NUM

Sequence number of step in route (* inherited from FPSINPUT.RTG_ROUTE_STEPS)

REVERSE_SEQ_NUM

IS_MAIN_ROUTE

Y indicates the route is the main processing route for PRD. N indicates it is a rework or alternate route. (* inherited from FPSBASE.RTG_ACTIVE_PRD_ROUTES_BASE)

STEP_SEC_NOHOLD_FOR_WSF

The FOR_WSF columns are used in populating WIP_STEP_FUTURE. This is based on the CTM_COLUMN_FOR_WIP_STEP_FUT column in GEN_FACILITIES. For example, if the value of that column is 7D_WAVG then we use the 7D_WAVG cycle times for WSF. (* inherited from FPSBASE.CTM_SUMMARY)

STEP_SEC_NOHOLD_FOR_WSF_TO_EOL

This is the expected seconds from the current step to the end of line not including time on hold. WIP_STEP_FUTURE is used for upcoming arrivals and should predict as if the lot will not go on hold unless it is known that it will. The result is that the predictions are reasonably correct for lots that do not go on hold or where we know the future hold - but very wrong for a few lots that go on hold that we do not expect. In contrast, WIP_FLUSH which is used for prediction completion of the route and all future routes will use the entire STEP_SEC including average hold. (* inherited from FPSBASE.CTM_SUMMARY)

HOLD_SEC_FOR_WSF

HOLD_SEC_FOR_WSF_TO_EOL

STEP_SEC_FULL_WAVG

QTY_COMP_FULL

FIRST_UNIT_SEC

Time for one unit to process when the tool starts from a standby state. On a batch tool -- defined as a tool where all units process together and take the same time regardless of qty -- this is the time for the batch. See our complete throughput documentation for more details. (* inherited from FPSINPUT.THP_EXTERNAL)

UNIT_INT_SEC

BATCH_INT_SEC

PROCESS_FAMILY

See https://help.inficonims.com/display/DW/Guide+to+Process+Families. (* inherited from FPSINPUT.RTG_PROCESS_FAMILIES)

EQP_TYPE

Each tool is assigned an EQP_TYPE and all tools in the same type are identical meaning that they should run at the same throughput when running the same process with the same chamber type count. We also expect similar availability since these tools are identical. However tools in the same EQP_TYPE may have different chamber configurations and may run different groups of processes. (* inherited from FPSINPUT.EQP_TYPES)

PROCESS_SUBFAMILY

Route step family is used for the Dashboard to separate processes in a process family based on shared but limited assignments. It is also the base for GP subfamily. (* inherited from FPSBASE.RTG_ROUTE_STEPS_PLUS)

PROCESS_MODULE

WIP_MODULE is used to credit moves and set goals. See comments on the module column in GEN_MODULES for info on this column and how it relates to eqp_module and mnt_module. (* inherited from FPSBASE.RTG_ROUTE_STEPS_PLUS)

PROCESS

Process defines what occurs at a step. Different steps can share the same process if they are identical. Process should normally determine allowed tools and recipe although it can be overridden by step, route, prd, lot, and experiment for exceptions. Each process is dynamically assigned to one or more eqp_type-process_family combinations with use_pct. One process_family is determined to be primary. If grouping is done correctly, a process should only be one eqp_group with no crossover. (* inherited from FPSINPUT.RTG_PROCESSES)

WAFER_SIZE

If the facility only has one wafer size then this column should be null in both RTG_PRDS and EQP_TYPES. If the facility has more than one wafer size then a value of null in EQP_TYPES means that those tools can run all wafer sizes. See column IS_ANY_WAFER_SIZE for details. (* inherited from FPSINPUT.GEN_WAFER_SIZES)

OPERATION_FAMILY

Grouping of route-step that is completely dependent on routing information from MES. The primary use of this field is for filtering on Operations Dashboard. Unfortunately for our database structure and naming convention, this field no longer has any link to operation. This is because operation is used primarily for Oper Moves and it is normal for steps in an operation to belong to multiple MES routing groups. For example, a sink step and a furnace step and a measurement step are in the same operation but each step belongs to the appropriate sink/furnace/measurement MES routing groups which we store in operation family. Since Dashboard already uses both operation and operation_family extensively and independently, we decided not to rename either column but simply remove the link. Please note that operation family is similar to process family and in fact they are often the same. The key differences are that operation family has nothing to do with equipment and that comes straight from ETL with no complex logic. Process family is the link between routing and equipment for the Operations Dashboard and therefore has complex logic. (* inherited from FPSINPUT.RTG_OPERATION_FAMILIES)

LINE_SECTION

Large grouping of the line, e.g. FEOL, BEOL, Cu, etc. There should be only a handful of values for the entire facility - or if the facility only has one section then we can leave this column blank. (* inherited from FPSINPUT.RTG_LINE_SECTIONS)

MODE_EST_MACHINE_RECIPE

ROUTE_FAMILY

Route_family indicates that all routes within the family have similar or even identical steps and have the same segments. At facilities where various prds share the same route it is likely that the route will be the route_family. This is sometimes referred to as the main process flow. It is used on Segment Summary and Line Viewer to group similar routes. (* inherited from FPSINPUT.RTG_ROUTE_FAMILIES)

ROUTE_GROUP

Route_group is the parent of route_family. Route_group is used on the Dashboard and other applications as a large grouping for filtering. At many sites this is referred to as technology. (* inherited from FPSINPUT.RTG_ROUTE_GROUPS)