FPSADMIN.DASH_P_QUEUE_TIMER_WIP

LOT

A lot is a group of units that process together. Usually lot_id or lot_number in MES. All units in a lot are in the same carrier but there may be multiple lots in a carrier. (* inherited from FPSINPUT.WIP_LOTS_STATIC)

QTY

Quantity of units in the lot according the qty_unit defined for the facility. It is required for all lots in each facility to have their qty defined in the same units therefore the change in the unit is critical to defining the facility. For example, a pretest facility might have a sort step in the middle where we learn the qty of die. Prior to this step we know only the wafer qty but after this step we know both wafer and die. Since wafer is the only qty we know throughput the flow then wafer must be defined as the qty unit for this facility. Die can then be populated as sec_qty when it is known. Similarly the wafer saw facility might have a step in the middle where we cut the wafers into die. After this step we no longer know the number of wafers which means that die must be the qty unit for this facility and wafers can be the sec_qty prior to the saw step. Please note that a lot with qty of 0 is allowed but only if the sec_qty is greater than 0. This is unusual but one case is where we know the wafers will be scrapped but cannot be scrapped quite yet. (* inherited from FPSINPUT.WIP_EVENT_HIST)

TIMER_DESCRIPTION

TIMER_ID

Unique number representing the queue timer to index with other tables. Automatically populated with RTG_QUEUE_TIMERS_ID_SEQ sequence. (* inherited from FPSINPUT.RTG_QUEUE_TIMERS)

SCHED_TOOL

the tool from the first lot that scheduled (* inherited from FPSAPP.SCH_W_SCHED_DURABLE_INSPECT)

TIMER_START_INST

TIMER_WARN_INST

TIMER_EXPIRED_INST

EXPIRED_SEC

Seconds from the start event until queue time restriction is expired. After expiration, the lot must rework or scrap or otherwise be evaluated. (* inherited from FPSINPUT.RTG_QUEUE_TIMERS)

START_PROCESS

END_PROCESS

START_PROCESS_FAMILY

END_PROCESS_FAMILY

START_PROCESS_SUBFAMILY

END_PROCESS_SUBFAMILY

START_PROCESS_GROUP

END_PROCESS_GROUP

START_PROCESS_MODULE

END_PROCESS_MODULE

START_OPERATION

END_OPERATION

START_OPERATION_FAMILY

END_OPERATION_FAMILY

PRD

Prd determines the route which is used to process the lot in the facility and what tools, recipes, durables, etc. can be used at each step. Prd also determines the next facility for the lot when it finishes its route. For detailed information on prd vs. planprd see table comments in RTG_PLANPRDS. (* inherited from FPSINPUT.RTG_PRDS)

LOT_TYPE

Lot_type is the base of the hierarchy that determines lot_family then lot_group. Ideally lot_type will come straight from the MES with little modification. (* inherited from FPSINPUT.WIP_LOT_TYPES)

START_ROUTE_SEGMENT

ROUTE_SEGMENT

Route_segment allows for clear hierarchical segment organization for Segment Summary and Line Viewer on Dashboard. This is often referred to as stage and typically will come from the MES (as opposed to facility_segment which we will typically have to define for our purposes). We recommend that all routes in the same route family have the same route segments in the same order so that the Line Viewer by route family will be consistent but if this is not the case then we approximate the order as best we can. (* inherited from FPSINPUT.RTG_ROUTE_STEPS)

END_ROUTE_SEGMENT

STATUS

WAIT_SEC_TO_SCHED

The lot may be scheduled but must not be allowed to dispatch or start until this number of seconds has elapsed. (* inherited from FPSINPUT.WIP_LOTS_STATIC)

WAIT_TO_SCHED_REASON

BLOCKING_PROCESS_FAMILY

PROCESS_STATE

Process state is the most commonly used level of our Enhanced Cycle Time hierarchy. This displays on Dashboard, Scheduler, Cycle Time Analyzer, and Finished Lot Cycle Time Reporter. Process state is the parent of ECT state, however, there is configuration for when to show the process state of Reserved in each application which is done in WIP_ECT_STATES. (* inherited from FPSADMIN.WIP_PROCESS_STATES)

PROCESS_STATE_DETAILS

PROCESS_STATE_DISPLAY

STEP_ENT_INST

Time when the lot entered the step. (* inherited from FPSBASE.WIP_LOT_HIST)

PROCESS_STATE_BG_COLOR

PROCESS_STATE_TEXT_COLOR

SCHED_GROUP_LIST

TIMER_ORDER

STATUS_SORT_ORDER

PROCESS_STATE_SORT_ORDER

FACILITY

Facility is included in almost every join in the DWH so this represents a definitive split. A route must have all steps on tools in the same facility. A tool must process all lots in the same facility. If your site has multiple buildings where lots run on routes using tools in multiple buildings then everything should be one facility. For example, multiple Fab buildings. But if your site has independent facilities like Fab and Test and Assembly where lot may progress from one to the next but on different routes then these should be different facilities. Since this column is in virtually every table it is critical that the value here is exactly matches what is in the MES if the MES has facility. Use facility_display for the display friendly name displayed in applications. See site_name comment for client/site/facility example. (* inherited from FPSINPUT.GEN_FACILITIES)

LOT_GROUP

Lot_group is a grouping of lot_family and is the highest grouping in the lot type hierarchy. There should be only a few values for lot_group, i.e. Prod, Dev, TW. We group WIP and moves by lot_group on the dashboard and we group cycle time calculations by lot_group so this is an important field. (* inherited from FPSINPUT.WIP_LOT_GROUPS)

IS_TW

Our standard filter to exclude test wafers is is_tw = N but what we really mean with this filter is to exclude any lots that do not add value for the facility. Lots which add value including sellable, development, and engineering and these lot groups should have is_tw set to N. Lots which do not add value are commonly grouped together and named "test wafers" which is why this flag is named is_tw. These include true test wafers like monitors and quals and dummies but also could include virtual lots used for training or testing, bare wafers, or really anything else including in the MES as a lot which does not add value. All of these lot groups should have is_tw set to Y. You could argue that the is_tw field might be more accurately named is_value or is_valuable or is_prod_eng_dev but is_tw is generally clear to most people. Plus it has the advantage that it is short which is nice given how frequently we use the is_tw = N filter. (* inherited from FPSINPUT.WIP_LOT_GROUPS)

PLAN_PRIORITY

Permanent priority of the lot set in the MES generally by planning. (* inherited from FPSINPUT.WIP_EVENT_HIST)

PLAN_PRIORITY_DISPLAY

CURR_PRIORITY

The priority at the current step. As the lot moves along the route after LAST_STEP_CURR_PRTY it will revert to PLAN_PRIORITY. For example, timelink or sendahead priority is only temporary. (* inherited from FPSINPUT.WIP_LOTS_STATIC)

CURR_PRIORITY_DISPLAY

PROCESS

Process defines what occurs at a step. Different steps can share the same process if they are identical. Process should normally determine allowed tools and recipe although it can be overridden by step, route, prd, lot, and experiment for exceptions. Each process is dynamically assigned to one or more eqp_type-process_family combinations with use_pct. One process_family is determined to be primary. If grouping is done correctly, a process should only be one eqp_group with no crossover. (* inherited from FPSINPUT.RTG_PROCESSES)

PROCESS_FAMILY

See https://help.inficonims.com/display/DW/Guide+to+Process+Families. (* inherited from FPSINPUT.RTG_PROCESS_FAMILIES)

PROCESS_SUBFAMILY

Route step family is used for the Dashboard to separate processes in a process family based on shared but limited assignments. It is also the base for GP subfamily. (* inherited from FPSBASE.RTG_ROUTE_STEPS_PLUS)

PROCESS_GROUP

Process group is the critical field where tools and processes come together for the purposes of Scheduler. Process group is in both EQP_TOOLS for the tools and in RTG_PROCESSES for processes. Ideally all tools that run the same set of processes with no crossover including back-up and emergency tools would be in the same process group but it is important to note that this is not technically required for Scheduler as long as all process groups are in the same sched group. (* inherited from FPSINPUT.RTG_PROCESS_GROUPS)

PROCESS_MODULE

WIP_MODULE is used to credit moves and set goals. See comments on the module column in GEN_MODULES for info on this column and how it relates to eqp_module and mnt_module. (* inherited from FPSBASE.RTG_ROUTE_STEPS_PLUS)

MODULE

Modules are departments of people who manage certain areas of the fab. The modules are assigned ownership of a set of tools to operate and maintain as well as steps on the route that they are responsible for executing. Since many of our tables include tool and step information together, we must distinguish between the owner of the step (WIP_MODULE), the owner of the operation of the tool (EQP_MODULE), and the owner of the maintenance of the tool (MNT_MODULE). WIP_MODULE is used to credit moves and set goals. Each route-step is assigned to a process family and then its wip_module is defined by the process family. EQP_MODULE is used to group tools particularly for tool performance reporting. Similar to WIP, each tool is dynamically assigned to a process family based on its assignments and then its eqp_module is defined by the process family. MNT_MODULE is usually the same as EQP_MODULE but unlike EQP_MODULE is not dependent on assignments but only on the EQP hierarchy. Each tool is assigned to an eqp_type and each eqp_type is assigned to a mnt_family and each mnt_family is assigned to a mnt_module. (* inherited from FPSINPUT.GEN_MODULES)

IS_IGNORE_WIP

This flag is in both RTG_OPERATION_FAMILIES and RTG_PROCESSES. If the value is Y for either the operation family or the process then we do not count WIP at the route-step towards the total for the facility. Typically this is set for staging operations. (* inherited from FPSINPUT.RTG_OPERATION_FAMILIES)

OPERATION

Operation is usually the primary level of routing in the MES and the level where the facility typically reports moves. FPS only allows one tool per step so our step is a lower level of routing than operation although both may be the same if the MES only allows one tool per operation. Note that because operation can include multiple steps and therefore multiple process families that we cannot have any association to equipment by operation. (* inherited from FPSINPUT.RTG_OPERATIONS)

OPERATION_FAMILY

Grouping of route-step that is completely dependent on routing information from MES. The primary use of this field is for filtering on Operations Dashboard. Unfortunately for our database structure and naming convention, this field no longer has any link to operation. This is because operation is used primarily for Oper Moves and it is normal for steps in an operation to belong to multiple MES routing groups. For example, a sink step and a furnace step and a measurement step are in the same operation but each step belongs to the appropriate sink/furnace/measurement MES routing groups which we store in operation family. Since Dashboard already uses both operation and operation_family extensively and independently, we decided not to rename either column but simply remove the link. Please note that operation family is similar to process family and in fact they are often the same. The key differences are that operation family has nothing to do with equipment and that comes straight from ETL with no complex logic. Process family is the link between routing and equipment for the Operations Dashboard and therefore has complex logic. (* inherited from FPSINPUT.RTG_OPERATION_FAMILIES)

LINE_SECTION

Large grouping of the line, e.g. FEOL, BEOL, Cu, etc. There should be only a handful of values for the entire facility - or if the facility only has one section then we can leave this column blank. (* inherited from FPSINPUT.RTG_LINE_SECTIONS)

FACILITY_SEGMENT

Facility segment is the parent of common step and is used as the highest level grouping when we show WIP for a route group or the entire facility where we cannot use route segment. We would prefer somewhere between 8 and 20 facility segments. Typically we will have to define these (as opposed to route_segment which we will typically come from the MES). There is no RTG_FACILITY_SEGMENTS table because sorting of facility segments is determined by common_step_sort. A trigger on RTG_COMMON_STEPS ensures that facility segments are contiguous when the entire facility is sorted by common step. (* inherited from FPSINPUT.RTG_COMMON_STEPS)

MAIN_ROUTE_FAMILY

Route family of the main route for the prd of the lot. (* inherited from FPSINPUT.WIP_OVR_OPER_MOVES_HIST)

MAIN_ROUTE_GROUP

Route group of main route. Often referred to as technology. (* inherited from FPSBASE.WIP_FLUSH)

CUSTOMER

Customer who will accept shipment of the lot. Currently this only used for grouping and filtering but in the future we might want to allow a customer to view a Dashboard only including their products. (* inherited from FPSINPUT.GEN_CUSTOMERS)