FPSADMIN.CTM_SUMMARY_P3_FILLIN_G6

Data Dictionary

FPSADMIN Tables

> FPSADMIN.CTM_SUMMARY_P3_FILLIN_G6

Table FPSADMIN.CTM_SUMMARY_P3_FILLIN_G6"

See comments in CTM_REF_SUMMARY_P3_FILLIN_G6 view.

Schema: FPSADMIN
Tablespace: FPSDATA
Primary key: FACILITY, PROCESS_FAMILY, BANK, LOT_GROUP, PRTY_CTM_GROUP, IS_NONSTD

Column	Type	Nullable	Comment
FACILITY	VARCHAR2(6)	N	Facility is included in almost every join in the DWH so this represents a definitive split. A route must have all steps on tools in the same facility. A tool must process all lots in the same facility. If your site has multiple buildings where lots run on routes using tools in multiple buildings then everything should be one facility. For example, multiple Fab buildings. But if your site has independent facilities like Fab and Test and Assembly where lot may progress from one to the next but on different routes then these should be different facilities. Since this column is in virtually every table it is critical that the value here is exactly matches what is in the MES if the MES has facility. Use facility_display for the display friendly name displayed in applications. See site_name comment for client/site/facility example. (* from FPSINPUT.GEN_FACILITIES)
PROCESS_FAMILY	VARCHAR2(50)	N	See https://help.inficonims.com/display/DW/Guide+to+Process+Families. (* from FPSINPUT.RTG_PROCESS_FAMILIES)
BANK	VARCHAR2(36)	N	Lots which are not on a route are considered in a bank and the bank name indicates why the lot is off route. Bank must be NA for lots which are on a route. Our standard filter for active lots is bank = NA. (* from FPSINPUT.RTG_BANKS)
LOT_GROUP	VARCHAR2(8)	N	Lot_group is a grouping of lot_family and is the highest grouping in the lot type hierarchy. There should be only a few values for lot_group, i.e. Prod, Dev, TW. We group WIP and moves by lot_group on the dashboard and we group cycle time calculations by lot_group so this is an important field. (* from FPSINPUT.WIP_LOT_GROUPS)
PRTY_CTM_GROUP	VARCHAR2(7)	N	This is one of the primary keys of our CTM tables. We use this group rather than the priority because we often have several different priorities which are close and are expected to have the same cycle time. (* from FPSINPUT.WIP_PRIORITIES)
IS_NONSTD	CHAR(1)	N	Our column to indicate non-standard processing at the step. For example, an experiment or a chain that is only active at a particular step or set of steps and then goes back to being normal for the route. If an experiment is severe enough that it affects the final product and has to be planned separately then it will be its own prd or planprd. (* from FPSBASE.WIP_LOT_HIST)
AT_LEAST_ONE_HOLD_SEC_7D_AV_G6	NUMBER(10)
AT_LEAST_ONE_HOLD_SEC_7D_MD_G6	NUMBER(10)
NUM_JOBS_COMP_2D_G6	NUMBER(9)
NUM_JOBS_COMP_7D_G6	NUMBER(9)
NUM_JOBS_COMP_FULL_G6	NUMBER(9)
NUM_JOBS_COMP_LONG_G6	NUMBER(9)
NUM_LOTS_ENDWIP_G6	NUMBER(9)
NUM_LOTS_MOVED_2D_G6	NUMBER(9)
NUM_LOTS_MOVED_7D_G6	NUMBER(9)
NUM_LOTS_MOVED_FULL_G6	NUMBER(9)
QTY_COMP_2D_G6	NUMBER(12)
QTY_COMP_7D_G6	NUMBER(12)
QTY_COMP_FULL_G6	NUMBER(12)
QTY_COMP_LONG_G6	NUMBER(12)
QTY_DSKIP_FULL_G6	NUMBER(12)
QTY_DTONLY_FULL_G6	NUMBER(12)
QTY_ISKIP_FULL_G6	NUMBER(12)
QTY_MOVED_2D_G6	NUMBER(12)
QTY_MOVED_7D_G6	NUMBER(12)
QTY_MOVED_FULL_G6	NUMBER(12)
QTY_MOVED_LONG_G6	NUMBER(12)
QTY_RT_OR_PRD_FULL_G6	NUMBER(12)
STEP_SEC_7D_MED_NOT_ISKIP_G6	NUMBER(10)
TOTAL_BLOCK_SEC_COMP_2D_G6	NUMBER(38)
TOTAL_BLOCK_SEC_COMP_7D_G6	NUMBER(38)
TOTAL_BLOCK_SEC_COMP_FULL_G6	NUMBER(38)
TOTAL_BLOCK_SEC_COMP_LONG_G6	NUMBER(38)
TOTAL_DISP_SEC_COMP_2D_G6	NUMBER(38)
TOTAL_DISP_SEC_COMP_7D_G6	NUMBER(38)
TOTAL_DISP_SEC_COMP_FULL_G6	NUMBER(38)
TOTAL_DISP_SEC_COMP_LONG_G6	NUMBER(38)
TOTAL_ENDED_SEC_COMP_2D_G6	NUMBER(38)
TOTAL_ENDED_SEC_COMP_7D_G6	NUMBER(38)
TOTAL_ENDED_SEC_COMP_FULL_G6	NUMBER(38)
TOTAL_ENDED_SEC_COMP_LONG_G6	NUMBER(38)
TOTAL_HOLD_SEC_COMP_2D_G6	NUMBER(38)
TOTAL_HOLD_SEC_COMP_7D_G6	NUMBER(38)
TOTAL_HOLD_SEC_COMP_FULL_G6	NUMBER(38)
TOTAL_HOLD_SEC_COMP_LONG_G6	NUMBER(38)
TOTAL_HOLD_SEC_DSKIP_FULL_G6	NUMBER(38)
TOTAL_HOLD_SEC_DTONLY_FULL_G6	NUMBER(38)
TOTAL_HOLD_SEC_R_OR_P_FULL_G6	NUMBER(38)
TOTAL_STEP_SEC_2D_G6	NUMBER(38)
TOTAL_STEP_SEC_7D_G6	NUMBER(38)
TOTAL_STEP_SEC_FULL_G6	NUMBER(38)
TOTAL_STEP_SEC_ISKIP_FULL_G6	NUMBER(38)
TOTAL_STEP_SEC_LONG_G6	NUMBER(38)
TOTAL_WAIT_SEC_COMP_2D_G6	NUMBER(38)
TOTAL_WAIT_SEC_COMP_7D_G6	NUMBER(38)
TOTAL_WAIT_SEC_COMP_FULL_G6	NUMBER(38)
TOTAL_WAIT_SEC_COMP_LONG_G6	NUMBER(38)
TOTAL_WAIT_SEC_DSKIP_FULL_G6	NUMBER(38)
TOTAL_WAIT_SEC_DTONLY_FULL_G6	NUMBER(38)