FPSINPUT.DASH_P_TOOLS_AND_STOCKERS

FACILITY

Facility is included in almost every join in the DWH so this represents a definitive split. A route must have all steps on tools in the same facility. A tool must process all lots in the same facility. If your site has multiple buildings where lots run on routes using tools in multiple buildings then everything should be one facility. For example, multiple Fab buildings. But if your site has independent facilities like Fab and Test and Assembly where lot may progress from one to the next but on different routes then these should be different facilities. Since this column is in virtually every table it is critical that the value here is exactly matches what is in the MES if the MES has facility. Use facility_display for the display friendly name displayed in applications. See site_name comment for client/site/facility example. (* inherited from FPSINPUT.GEN_FACILITIES)

TOOL

Tool is generally just the main tool. The exception is when different entities on the tool run completely independently and it is physically impossible to run wafers of the same lot across multiple entities. In this exception case, we may want to assign the entities to different eqp_types and therefore we should define each entity as a tool. Please note that when we do this there is no indication whatsoever that these different entities are on the same tool. (* inherited from FPSINPUT.EQP_TOOLS)

EQP_TYPE

Each tool is assigned an EQP_TYPE and all tools in the same type are identical meaning that they should run at the same throughput when running the same process with the same chamber type count. We also expect similar availability since these tools are identical. However tools in the same EQP_TYPE may have different chamber configurations and may run different groups of processes. (* inherited from FPSINPUT.EQP_TYPES)

EQP_MODULE

EQP_MODULE is the module responsible for operating the tool. See comments on the module column in GEN_MODULES for info on this column and how it relates to eqp_module and mnt_module. (* inherited from FPSBASE.EQP_TOOLS_PLUS)

PROCESS_GROUP

Process group is the critical field where tools and processes come together for the purposes of Scheduler. Process group is in both EQP_TOOLS for the tools and in RTG_PROCESSES for processes. Ideally all tools that run the same set of processes with no crossover including back-up and emergency tools would be in the same process group but it is important to note that this is not technically required for Scheduler as long as all process groups are in the same sched group. (* inherited from FPSINPUT.RTG_PROCESS_GROUPS)

PROCESS_FAMILY

See https://help.inficonims.com/display/DW/Guide+to+Process+Families. (* inherited from FPSINPUT.RTG_PROCESS_FAMILIES)

PLAN_AVAIL

Planned availability used in goal planner and capacity model. Plan_avail + plan_sched + plan_unsched = 100. (* inherited from FPSINPUT.EQP_TYPES)

PLAN_UTIL

Planned utilization used in goal planner and capacity model. Must be less than plan_avail. (* inherited from FPSINPUT.EQP_TYPES)

MNT_MODULE

MNT_MODULE is the module responsible for maintaining the tool and is a property of MNT_FAMILY. See comments on the module column in GEN_MODULES for how it relates to eqp_module and mnt_module. (* inherited from FPSINPUT.EQP_MNT_FAMILIES)

MNT_FAMILY

MNT_FAMILY is assigned to each EQP_TYPE. Tools in the same MNT_FAMILY are similar and share the same maintenance schedule. (* inherited from FPSINPUT.EQP_MNT_FAMILIES)

BAY

A bay is a physical area within the building. The bay is important for estimating travel time for a carrier to reach its destination as we usually store these estimates as a matrix of bay-to-bay and assume that the estimated time from any location within one bay to any location within another bay is approximately the same. (* inherited from FPSINPUT.MHS_BAYS)

FILTER_FROM_EQP_SUMMARIES

If this is Y then tools in this MNT_FAMILY will not be included in the EQP/ETP state summary bar charts on the facility and module level. This applies to bar charts on the Operations, Equipment, and Performance tabs of the Dashboard. EQP/ETP state summaries will still be available for these tools on the process family and tool level. (* inherited from FPSINPUT.EQP_MNT_FAMILIES)