FPSBASE.WIP_REWORK_HIST

INST

Time when the event occurred. (* inherited from FPSINPUT.WIP_EVENT_HIST)

EVENT

This is the event registered in the MES. This is for the historical record and display only. Each event is mapped to an FPS event_type and the event_type is what is used by FPS applications. (* inherited from FPSINPUT.WIP_EVENTS)

LOT

A lot is a group of units that process together. Usually lot_id or lot_number in MES. All units in a lot are in the same carrier but there may be multiple lots in a carrier. (* inherited from FPSINPUT.WIP_LOTS_STATIC)

QTY

Quantity of units in the lot according the qty_unit defined for the facility. It is required for all lots in each facility to have their qty defined in the same units therefore the change in the unit is critical to defining the facility. For example, a pretest facility might have a sort step in the middle where we learn the qty of die. Prior to this step we know only the wafer qty but after this step we know both wafer and die. Since wafer is the only qty we know throughput the flow then wafer must be defined as the qty unit for this facility. Die can then be populated as sec_qty when it is known. Similarly the wafer saw facility might have a step in the middle where we cut the wafers into die. After this step we no longer know the number of wafers which means that die must be the qty unit for this facility and wafers can be the sec_qty prior to the saw step. Please note that a lot with qty of 0 is allowed but only if the sec_qty is greater than 0. This is unusual but one case is where we know the wafers will be scrapped but cannot be scrapped quite yet. (* inherited from FPSINPUT.WIP_EVENT_HIST)

ROUTE

Route that has threading requirements (* inherited from FPSINPUT.RTG_STEP_THREADING)

STEP

A single processing step within a route representing a single tool visit. Step is often a very complex string and should rarely be displayed. Instead we should use process_display. (* inherited from FPSINPUT.RTG_ROUTE_STEPS)

NEXT_ROUTE

Event moved the lot to this new route (* inherited from FPSINPUT.WIP_EVENT_HIST)

NEXT_STEP

Event moved the lot to this new step (* inherited from FPSINPUT.WIP_EVENT_HIST)

LAST_TOOL

For rework and scrap events we automatically look up the last tool where the lot processed including metrology tools. (* inherited from FPSBASE.WIP_LOT_HIST)

LAST_TOOL_BEG_INST

Time of the last event on the previous tool (including metrology) for the lot occurred. (* inherited from FPSBASE.WIP_LOT_HIST)

LAST_PROCESS_TOOL

For rework and scrap events we automatically look up the last process tool for the lot. Process tool is determined by the process class of the tool and excludes metrology and support tools. It is likely this was the cause of the rework or scrap although by no means certain. (* inherited from FPSBASE.WIP_LOT_HIST)

LAST_PROCESS_TOOL_BEG_INST

Time when the lot finished processing on the previous tool (excluding metrology). (* inherited from FPSBASE.WIP_LOT_HIST)

FACILITY

Facility is included in almost every join in the DWH so this represents a definitive split. A route must have all steps on tools in the same facility. A tool must process all lots in the same facility. If your site has multiple buildings where lots run on routes using tools in multiple buildings then everything should be one facility. For example, multiple Fab buildings. But if your site has independent facilities like Fab and Test and Assembly where lot may progress from one to the next but on different routes then these should be different facilities. Since this column is in virtually every table it is critical that the value here is exactly matches what is in the MES if the MES has facility. Use facility_display for the display friendly name displayed in applications. See site_name comment for client/site/facility example. (* inherited from FPSINPUT.GEN_FACILITIES)

PRD

Prd determines the route which is used to process the lot in the facility and what tools, recipes, durables, etc. can be used at each step. Prd also determines the next facility for the lot when it finishes its route. For detailed information on prd vs. planprd see table comments in RTG_PLANPRDS. (* inherited from FPSINPUT.RTG_PRDS)

PLANPRD

Planning product used for all planning purposes. All lots with the same planprd are interchangeable to ship to the customer regardless of their prd, route, technology, wafer size, etc. For detailed information on prd vs. planprd see table comments in RTG_PLANPRDS. (* inherited from FPSINPUT.RTG_PLANPRDS)

LOT_TYPE

Lot_type is the base of the hierarchy that determines lot_family then lot_group. Ideally lot_type will come straight from the MES with little modification. (* inherited from FPSINPUT.WIP_LOT_TYPES)

CURR_PRIORITY

The priority at the current step. As the lot moves along the route after LAST_STEP_CURR_PRTY it will revert to PLAN_PRIORITY. For example, timelink or sendahead priority is only temporary. (* inherited from FPSINPUT.WIP_LOTS_STATIC)

PLAN_PRIORITY

Permanent priority of the lot set in the MES generally by planning. (* inherited from FPSINPUT.WIP_EVENT_HIST)

IS_NONSTD

Our column to indicate non-standard processing at the step. For example, an experiment or a chain that is only active at a particular step or set of steps and then goes back to being normal for the route. If an experiment is severe enough that it affects the final product and has to be planned separately then it will be its own prd or planprd. (* inherited from FPSBASE.WIP_LOT_HIST)

OPERATOR

In history tables, this is the username of the person or system who logged the event. In EQP_MNT_FUTURE, this is the username of the person who input the information about the maintenance event. Usernames can be looked up in GEN_USERS to get full names, email address, etc. Please note that the existence of each username in GEN_USERS is optional, meaning that it is never required for the username logged in the operator column to be in GEN_USERS. (* inherited from FPSINPUT.WIP_EVENT_HIST)

REWORK_COMMENT